Set the ALLOW_SET_REPEAT Preference

Use this activity to set the ALLOW_SET_REPEAT application preference to allow a user to set a sample scheme analyte to have its analysis repeated.

The Scope for this preference is usually set at user level.

Activity Steps

1. Access the CCPREF—Preference application from the main menu or quick launch to display the CCPREF—Search Preference screen.
2. Enter the Preference Name—ALLOW_SET_REPEAT
3. Click Submit.
4. Open the preference with the lowest level of scope to display the CCPREF—Preference Detail screen.
5. If Is System is checked, then:
   1. Uncheck Is System.
   2. Click Submit.
6. Ensure that Setting Type is set to BOOLEAN.
7. To allow a user to set a repeat, check Setting Value.

   When a result is set to repeat, the sample scheme analyte's result are cleared and its Workflow Status is set to Repeat.

8. To prohibit a user from setting a repeat, uncheck Setting Value.

   The user cannot request repeat analysis for the sample scheme analyte.

9. Set the Preference Type to PREFERENCE.
10. Ensure Is Active is checked.
11. Click Submit.
12. If Is System was initially checked, then:
    1. Check Is System.
    2. Click Submit.