Set the VALIDATE_BATCH_SAMPLES_USERGROUP Preference

Use this activity to set the VALIDATE_BATCH_SAMPLES_USERGROUP application preference to specify which users can validate laboratory batch samples.

Activity Steps

1. Access the CCPREF—Preference application from the main menu or quick launch to display the CCPREF—Search Preference screen.
2. Enter the Preference Name—VALIDATE_BATCH_SAMPLES_USERGROUP
3. Click Submit.
4. Open the preference with the lowest level of scope to display the CCPREF—Preference Detail screen.

   The Scope for this preference is usually set at laboratory level.

5. If Is System is checked, then:
   1. Uncheck Is System.
   2. Click Submit.
6. Ensure that Setting Type is set to STRING.
7. Enter the code of the relevant user group in Setting Value.

   A user who is a member of the user group can validate laboratory batch samples during a validation session. A user who is not a member of the user group cannot validate laboratory batch samples.

8. Set the Preference Type to PREFERENCE.
9. Ensure Is Active is checked.
10. Click Submit.
11. If Is System was initially checked, then:
    1. Check Is System.
    2. Click Submit.