Client Sample

Description

A registered sample submitted by a client, referred to as an unknown sample as they are generic in nature and the results are not generally known—which is why they are being tested.

Properties

Primary Analytical Type Unknown
Primary QC Type Code <empty>
Secondary Analytical Type N/A (This is the actual content of the field, and implies that secondary assessment is not applicable.)
Secondary QC Type Code <empty>
Duplicate Original Sample <empty>
Spike Original Sample <empty>
Standard Code <empty>
Standard Lot Code <empty>

Processes used to Create Client Samples

  • Create sample, and expand from a sample group using the CCREGN—Job application.
  • Create sample from template using the CCREGN—Job application.
  • Create composite sample using the CCREGN—Job application.

QC Assessments Performed

  1. Assessment of Results against Detection Limits

    Using the sample scheme analyte's Internal Lower DL (defaults to the scheme version analyte's Internal Lower DL) and/or the sample scheme analyte's Internal Upper DL (defaults to the scheme version analyte's Internal Upper DL).

  2. Assessment of Results against Scheme or Surrogate Limits

    Using scheme limits:

    The sample scheme's Scheme Limits Specification Code must be a specification that has a Specification Type of Scheme (defaults to the scheme's Limit Specification Code).

    The specification contains limits for the matching Scheme Code, Scheme Version, Analyte Code and Internal Unit Code.

    or using surrogate limits:

    The scheme version analyte's Surrogate Recovery Lower Limit and/or the scheme version analyte's Surrogate Recovery Upper Limit.

  3. Assessment of the Product Quality of Samples

    One or more sample specification.

    Each sample specification's Specification Code must be a specification that has a Specification Type of Product.

    The specification contains limits for the matching Scheme Code, Scheme Version, Analyte Code and Internal Unit Code.