Depth Accuracy Report ribbon menu

Note: The Depth Accuracy Report ribbon menu is available in the Drill module and the Measure module.

Report group

Option		Description
	Close Report	Return to the drill pattern view, or if showing the selected holes in the pattern view, return to the depth accuracy report.
	Print	Print.

Report Settings group

Option		Description
Tolerance Type		Select from Percent and Metres or Feet.
Use Upper/Lower Tolerances		If checked, enter upper and lower tolerances. If unchecked, use the slider to select a tolerance between 0 and 20 percent, or 0 and 3 metres, or 0 and 6 feet.