Maintain Lead-in Line

Note: Refer to the manufacturer's product specifications when adding or editing lead-in line.

Access lead-in line maintenance:

  1. On the DataBlast Application Menu, select Product Maintenance.

    The Product Maintenance screen displays.

  2. Select the Lead-in Line node.

    The Product Maintenance Ribbon Menu displays.

To add lead-in line:

  1. On the Product Maintenance ribbon menu, click Add Lead-in Line.

    The <Product> screen displays.

  2. In the Product field group:
    1. Select the Supplier from the defined suppliers. See Maintain Suppliers.
    2. Enter the Product Range Name. This is the supplier's name for the product. Maximum length: 16 characters.
    3. Enter the Site Name. This is the name you use for the product at your mine site and must be unique. Default: The Product Range Name (which is also the Product Name).
    4. Enter the Supplier Range Short Name and Supplier Type Short Name. These names are used for grouping lead-in lines and do not need to be unique. Maximum length: 5 characters.
    5. Select the Hazard Class from 1.1B, 1.1D, 1.4S, 1.5D, 3 and 5.1.
  3. In the Specifications field group, select whether the lead-in line is for Surface Only.
  4. In the Appearance field group, for the white and dark backgrounds, update the following fields as required.
    • Product Colour
    • Text Colour
  5. Click Apply.
  6. Click Save Changes.

To edit lead-in line:

  1. Select the lead-in line.
  2. On the Product Maintenance ribbon menu, click Edit Product; or double-click the product.
  3. Edit the product as required.
  4. Click Save Changes.

To deactivate lead-in line:

  1. Uncheck Active for the lead-in line.

    The product displays with strike-through text.

  2. Click Save Changes.