Modelling Settings

For context, see Configure Mine Site Settings.

Configure the following modelling settings as required:

  • Modelling Nominal Bench Height
  • Modelling Nominal Subgrade
  • Modelling Nominal Strata Dip
  • Charge Standard Blast Type—Select from the blast types that have a charge standard type of Conventional. See Maintain Charge Standard Blast Types.

Configure the following modelling settings as required if using G-Blast:

  • Minimum Stemming Diameter Count—Number to be multiplied by the drill diameter to determine the minimum length of stemming.
  • Minimum Explosives Deck Length Diameter Count
  • Stemming Diameter Count
  • Preconditioning Depth Diameter Count
  • Roof Deck Diameter Count
  • Minimum Roof Deck Diameter Count
  • Floor Deck Diameter Count
  • Minimum Floor Deck Diameter Count
  • Sky Or Sub Seam Extension Diameter Count
  • Roof Transition Diameter Count
  • Charge Standard Blast Type—Select from the blast types that have a charge standard type of G-Blast.