Basic mine site settings
For context, see Configure mine site settings.
Configure the following basic mine site settings as required:
- Mine Site Name
- Zero Angle Style: For example, if you select the third radio button clockwise, hole angles are measured from the horizontal plane; that is, a vertical hole measured downwards is 90°.
- Time Zone
- Default Drill Pattern Type: Select from the defined drill pattern types. See Maintain drill pattern types.
- Default Hole Sort: Order used to sort holes when generating a charge sheet and in measurement entry screens. Select from Row and Echelon.
- Conventional Charge Standard View Style: Controls the order of definitions in the matrix for charge standards. Select from Subtypes Across, Lengths Down and Lengths Across, Subtypes Down.
- Default Pattern Label Text Height: Default label text size for new patterns.
- Explosive Mass Rounding
- Default Number of Days to Check Live Patterns for Changed Data: Only live patterns are sent to BlastPad devices. See BlastPad.
- Charge Authorisation Enabled: If checked, holes can be authorised in the Charge module. See Authorise holes for charge loading.
- BlastPad Requires Charge Authorisation: If checked, the charge design only for authorised holes displays for operators. Only applicable if Charge Authorisation Enabled is checked.
- Treat Wet Holes as Dewatered by Default for New Conventional and G-Blast Charge Standards: If checked, Treat Wet Holes as Dewatered is checked for new charge standards. Default and recommended: Unchecked. See Maintain conventional charge standards and Maintain G-Blast charge standards.
Note: The Measurement Type is set to Metric.
