First-in-first-out (FIFO) Stockpiles
FIFO stockpiles consider both the quantity and quality loaded onto and off the stockpiles in their calculations. Data is stored for each layer, and can be viewed on the Layers tab.
Example: A mine has the following stockpiles:
- MS-1—Mine Source stockpile 1 has Cu=25%, H2O=10% and has ABC Mining as a 100% contributor.
- MS-2—Mine Source stockpile 1 has Cu=20%, H2O=5% and has Diversified Mining as a 100% contributor.
- FIFO—FIFO stockpile starts with 0 tonnes of material.
- PROD—Production stockpile starts with 0 tonnes of material.
The following transactions take place:
- 5000 tonnes is stacked onto FIFO from MS-1.
- 5000 tonnes is stacked onto FIFO from MS-2.
- 7500 tonnes is reclaimed from FIFO and stacked onto PROD.
The following table displays the transaction history of the FIFO stockpile.
|
Sequence |
Mass |
Balance |
Cu % |
Cu (t) |
H2O% |
ABC Mining |
Diversified Mining |
|---|---|---|---|---|---|---|---|
|
1 |
5,000.00 |
5,000.00 |
25.00 |
1,125.00 |
10.00 |
5,000.00 (100.00%) |
|
|
2 |
5,000.00 |
10,000.00 |
22.43 |
2,075.00 |
7.50 |
5,000.00 (50.00%) |
5,000.00 (50.00%) |
|
3 |
7,500.00 |
2,500.00 |
20.00 |
475.00 |
5.00 |
2,500.00 (100.00%) |
