View Traceability for a Stockpile

Security Note: Assuming you can view the stockpile, no specific security right is required for this activity.

Activity Steps

  1. Open the WAG Stockpile, FIFO Stockpile, LIFO Stockpile, 3D Stockpile or Waste Stockpile.
  2. In the Criteria field group, select the Start Date and End Date for the data to display.
  3. Select the Traceability tab.
  4. Update the Traceability View if required. Default: As specified on the Options screen. See Configure the Traceability Display.
  5. If the Traceability View is Tree Grid:
    1. Select the Date.

      For Show Sources, the traceability data is up to the selected date and time.

      For Show Destinations, the traceability data is from the selected date and time.

    2. Select whether to Show Sources or Show Destinations.
    3. Select whether to Show Analytes. If checked, a column displays for each analyte that has quality data.
    4. If Show Analytes is checked, select whether to Show Analyte Content. If checked, a column displays for each analyte that has Show Content Basis checked in the Analyte Definition Editor. Disabled if no analytes are configured to show content basis.
    5. Select whether to Show Stockpile Paths. If unchecked, only the stockpile name displays.
    6. Select an Analyte Group to limit the display if required. Select from the analyte groups defined on the Quality panel of the Solution Explorer.
    7. Select a Contributor Group to limit the display if required. Select from the contributor groups defined on the Quality panel of the Solution Explorer.
    8. Edit the Maximum Query Levels if required. If left blank, all levels of traceability data display.
    9. Select despatch methods to Stop at Despatches if required. For Show Sources, limits the display to the traceability data since the selected despatch method(s). For Show Destinations, limits the display to the traceability data up to the selected despatch method(s). Select from Direct, Service Trip, Shipment, Train and Truck Despatch.
  6. If the Traceability View is Diagram:
    1. Select whether to Show Sources or Show Destinations.
    2. Select the Method from Closing Balance and Movements (that is, transactions).
  7. Click Refresh.

    Note: Click a source or destination to display its quality as a tooltip, and then hover the mouse over subsequent sources or destinations to view their qualities. Click any stockpile to open it and view its details.