Attribute Ratio Chart

• Attribute Ratio Chart
  • Configuration

Configuration

The Attribute Ratio Chart report has the following configuration.

• numerator filter—Specifies which attribute is selected for the top of the fraction.
• denominator filter—Specifies which attribute is selected for the bottom of the fraction. Attributes of the same process must be selected.
• location filter—Displays attribute ratio values filtered by location. Select from:
  • (all pits)—The default option which displays attribute ratio values for material movements from all pits.
  • (all dumps)—Displays the attribute ratio values for material movements to all dumps.
  • (all)—Displays attribute ratio values for material movements for all locations (pits and dumps).
  • single pit—Displays attribute ratio values for material movements from a particular pit.
  • single dump—Displays attribute ratio values for material movements to a particular dump.
  • pit group—Displays the attribute ratio values from a particular pit group.
  • dump group—Displays the attribute ratio values to a particular dump group.

• stockpile filter—Displays attribute ratio values filtered by stockpile:
  • (all)—The default option including attribute ratio values for material movements over all stockpiles.
  • individual stockpile—Includes attribute ratio values for material movements for the selected stockpile.
  • stockpile group—Includes attribute ratio values for all stockpiles within the stockpile group.
• movements filter—Displays attribute ratio values for material movements of specific types:
  • direct—Represents in-situ waste material which is mined and contributes to the default waste process (pit to waste) and/or in-situ material which is mined and directly processed within the same time period (pit to process).
  • stockpiled—Represents in-situ material which is mined and stockpiled (pit to stockpile).
  • reclaimed—Represents stockpiled material which is reclaimed (stockpile to process).
  • default/automatic individual process—Represents the default selection for individual processes which includes direct (pit to process) and reclaimed material (stockpile to process). This selection can be changed by clearing default.
  • default/automatic (total)—Represents the default selection for the (total) process option which includes direct (pit to process and pit to waste) and stockpiled material (pit to stockpile). This selection represents the total from pit movement and can be changed by clearing default.
• constraints setting—If selected, the attribute ratio constraint configured in scenario | constraints displays as a horizontal dashed red line.

  Note: The use attribute ratio constraints setting must be selected in settings | user preferences to make the attribute ratio constraint available in scenario | constraints.