Stockpile Chart

• Stockpile Chart
  • Configuration

Configuration

The Stockpile Chart report has the following configuration.

• stockpile filter—Displays the quantity of aggregate material on the selected stockpile(s). Select from:
  • (all)—The default option displays aggregate material for all stockpiles stacked by stockpile.
  • individual stockpile—Displays aggregate material on the selected stockpile.
  • stockpile group—Displays total aggregate material on stockpiles in the stockpile group.

• process filter—Displays the quantity of stockpiled material that contributes to the selected process or to all processes (total).
• attribute field—Displays the distribution of the attribute values for a specific stockpile and a specific process laid over the stockpile chart.
• show limit setting—If selected, the stockpile limit configured in model | stockpiles displays as a horizontal dashed red line. A specific stockpile and a specific process must be selected to view the limit.
• stack by stockpile setting—Only enabled when the stockpile filter is set to a stockpile group. If selected, displays the quantity of stockpiled material on each stockpile within the stockpile group.