Import Validation Errors

Name	Description
Adjustment date cannot be in the future	Adjustment date cannot be in the future
Invalid Attribute Value	Attribute value must be numeric.
Unknown Attribute	Attribute name (or the category value) is invalid for this attribute assignment.
Attribute value not in allowed range.	The attribute value provided was outside of the allowed range defined against the attribute.
Block Model Type Id is set to Unknown.	Block Model Type Id is set to Unknown.
Block Model Start Date is not present when End Date has been specified.	Block Model Start Date is not present when End Date has been specified.
The block model name was not specified.	The block model name was not specified. Please amend the mapping or update the data.
Block Model Start Date is after the End Date.	Block Model Start Date is after the End Date.
Both percentages required	Both the opening and closing percentage must be specified.
Both volumes required	Both the opening and closing volumes must be specified.
Calculated Density must be greater than or equal to 1 and less than or equal to 10	Calculated Density has value that is not between 1 and 10.
Cannot modify approved data	Time-based data which occurred prior to and including the Data Approval date/shift cannot be modified. This data must be unapproved before making any changes.
Cannot delete approved block	Cannot delete block because it is referenced by approved data.
Cannot delete model cell	Cannot delete model cell because it is referenced by a model survey.
Volume mismatch	Opening volume for the cell does not match the corresponding closing volume of the previous period.
Closing volume is too great	Closing volume must be less than or equal to the opening volume.
Closing Volume exceeds Previous Minimum Closing Volume	Closing Volume exceeds Previous Minimum Closing Volume
Control Point External System ID required.	An External System ID is required for this Control Point.
Control Point Misclassification (Crusher to Crusher).	Invalid source and destination combination (Crusher to Crusher).
Control Point Name required.	A name is required for this Control Point.
Density must be greater than or equal to 1 and less than or equal to 10	Density has value that is not between 1 and 10.
Destination entity has a name and no type	Destination entity has a name but also required an entity type.
Destination Entity Type cannot be resolved.	Destination Entity Type cannot be resolved.
Destination material type is required	Destinations with an unknown or unspecified entity must define a material type if the entity type is known.
Dry Tonnes cannot be zero or negative.	Dry Tonnes cannot be zero or negative.
Dry Tonnes greater than Wet Tonnes.	Dry Tonnes cannot be greater than Wet Tonnes.
Duplicate Entity In Survey	An entity has been referenced multiple times in the same survey.
Duplicate external system Id	There is one or more duplicate external system Ids.
Duplicate Mine Plan Value external system Id	There is one or more duplicate Mine Plan Value external system Ids.
Duplicate Stockpile Adjustment	Multiple Stockpile Adjustments for this stockpile and date/shift are present in the import.
Duplicate Surveys have been detected.	Duplicate Surveys with the same name and parent location have been detected.
End date later than plan end date	The mine plan value end date cannot be later than the mine plan end date.
Entity Start Date Shift Id is not present when End Date Shift Id has been specified.	Entity Start Date Shift Id is not present when End Date Shift Id has been specified.
Model Cell could not be found	The Model Cell could not be resolved for the specified block model.
The Entity Name already exists as a Haulage Alias.	The Entity Name already exists as a Haulage Alias. The Haulage Alias must be deleted before an Entity can be created with this name.
Opening Tonnes cannot be negative	Opening Tonnes cannot be negative.
Opening Volume cannot be negative	Opening Volume cannot be negative.
Entity Start Date Shift Id is after the End Date Shift Id.	Entity Start Date Shift Id is after the End Date Shift Id.
Error Tracking Limit Exceeded Format String Name	Error Tracking Limit Exceeded Format String Name
External System Id is required.	External System Id is required.
Failed To Convert Field Validation Name	Failed To Convert Field Validation Name
Field Exceeds Maximum Length Validation Name	Field Exceeds Maximum Length Validation Name
Field Is Mandatory And No Value Supplied Validation Name	Field Is Mandatory And No Value Supplied Validation Name
Field Is Not of the Exact Length Validation Name	Field Is Not of the Exact Length Validation Name
Field Is Shorter Than Minimum Length Validation Name	Field Is Shorter Than Minimum Length Validation Name
Gap exists between the end of the last model survey and the start of this model survey	There was a gap between the end of the last model survey and the start of this model survey (%ModelSurveyName%).
Grade cannot be negative	Grade cannot be negative
Grade value is less than 0.	Grade '%GradeName%' value is less than 0. Grade Id: %GradeId%.
Haulage Misclassification (Crusher to Crusher).	Haulage invalid source and destination combination (Crusher to Crusher).
Haulage must have Tonnes or Volume specified.	Haulage must have Tonnes or Volume specified.
Import Measure Type Invalid	Import Measure Type must be a valid string that match one the names in Import Measure Type Table
Import Measure Type is not allowed	Import Measure Type other than 'Raw' is allowed only when Mass Balancing option is set to 'Imported Value'
Invalid Entity Group Name	The specified entity group name does not match any existing groups.
Invalid Value	'%ARG%' is not a valid floating point number.
Invalid Polygon	Polygon is invalid. The polygon has one or more points that is either duplicated or failed validation.
Missing Value	'%ARG%' is required.
Lookup failed	Record lookup has failed with '%Message%' message.
Unknown Block Model	Mine plan cannot reference unknown Block Model ID. Please check the block model name, block model type and parent location specified.
Mine plan could not be resolved	The ID of the mine plan could not be resolved.
Missing source or destination details	One of Source Entity, Source Entity Type, Destination Entity or Destination Entity Type is required.
Mine plan type is required	Mine plan type is required.
Mine plan value cannot be resolved	This grade cannot be associated with a mine plan value.
Grade %GradeName% not found.	Grade for Mine plan value is not valid.
Model Cell Load Invalid Data Type	Model Cell Load Invalid Data Type Details
Unknown Block Model	Model Survey cannot reference unknown Block Model Id.
Unknown Survey Type	Model Survey cannot accept invalid Survey Type Id.
Unknown Time Period	Model Survey cannot reference an unknown Time Period Id.
Moisture value is not valid	Moisture must be within the range 0-99.
No Moisture grade exists.	A grade of type Moisture has not been defined in the system.
Entity has null Density.	Density value is required and cannot be calculated using Tonnes and Volume.
Entity has null Tonnes.	Tonnes value is required and cannot be calculated using Volume and Density.
Depletion tonnes invalid	Tonnes value is required and cannot be calculated using Volume and Density.
Tonnes value is required	Tonnes value is required and cannot be calculated using Volume and Density.
Volume is required	Volume value is required and cannot be calculated using Tonnes and Density.
Entity has null Volume.	Volume value is required and cannot be calculated using Tonnes and Density.
Plan Start Date is after Plan End Date	Plan Start Date is after Plan End Date.
Plan Transaction Start Date is after Plan Transaction End Date	Plan Transaction Start Date is after Plan Transaction End Date.
Duplicated Values	There are one or more duplicate points with exact same polygon name and point index.
A Raw Movement cannot be found.	A Raw Movement cannot be found for the specified External System Id.
Non-primary Raw Movement Grade could not be resolved.	Non-primary Raw Movement Grade could not be resolved.
Raw Movement Grade must not be negative.	Raw Movement Grade must be greater than or equal to 0.
Measurement Date Time could not be calculated	Measurement Date Time could not be calculated. Please verify the Raw Movement Start and End Date is valid and the Start and End Shift is a valid Shift.
Raw Movement Measurement Start and End Date missing.	Raw Movement Measurement Start and End Date cannot be missing.
Measurement Start Date after End Date	Measurement Start Date cannot be after End Date
Raw Movement record must specify Source and Destination Name.	Raw Movement record must specify Source and Destination Name.
Secondary Grade name was not recognised.	A grade was specified that does not match any secondary grades configured for the system. Secondary grades must not belong to the Primary/Head grade group.
Source entity has a name and no type	Source entity has a name but also required an entity type.
Source Entity Type cannot be resolved.	Source Entity Type cannot be resolved.
Source material type is required	Sources with an unknown or unspecified entity must define a material type if the entity type is known.
Start date earlier than plan date	The mine plan value start date cannot be earlier than the mine plan start date.
Stockpile Adjustment must be for a valid Stockpile	Stockpile Adjustment must be for a valid Stockpile.
Stockpile adjustment manual entry exists.	A manual stockpile adjustment for this stockpile and dateshift already exists and cannot be overwritten by import
Stockpile Adjustments must set tonnes or volume or grade values	Stockpile Adjustments must set tonnes or volume or grade values.
A single stockpile adjustment cannot reset both tonnes and volume	A single stockpile adjustment cannot reset both tonnes and volume.
Survey Stockpile Adjustments must set volume	Survey Stockpile Adjustments must set volume.
Survey Stockpile Adjustments cannot set grades	Survey Stockpile Adjustments cannot set grades.
Survey Stockpile Adjustments cannot set tonnes	Survey Stockpile Adjustments cannot set tonnes.
Stockpile is not open at adjustment date	Stockpile is not open at adjustment date
Volume mismatch	Opening volume for the sub cell does not match the corresponding closing volume of the previous period.
Survey Stockpile Adjustment must have a volume specified	Survey Stockpile Adjustment must have a volume specified
Survey type can't be null	The survey type id cannot be null.
Time Period cannot be found	Unable to find a Time Period associated with this record.
Time period name does not match.	Time Period name does not match with the mapped start date and end date.
Time Period overlaps	Time Period cannot overlap an existing Time Period of the same type.
Time Period Start Date is after End Date.	Time Period Start Date is after End Date.
Tonnes, Volume, Density mismatch.	Tonnes, Volume, Density mismatch. The calculated result of Tonnes divided by Density should be within 5% of the entered Volume. Please make the appropriate adjustment.
Tonnes value cannot be negative	Tonnes value cannot be negative.
Transport Shipping must have Tonnes or Volume specified.	Transport Shipping must have Tonnes or Volume specified.
Mass by moisture basis cannot be calculated	To calculate moisture basis, two or more of the following fields must be provided: Wet Tonnes, Dry Tonnes and Moisture.
Unclosed Polygon	Polygon must be closed and having the last point coordinate equals to the first point.
Invalid Entity Name	Unable to resolve entity. Please provide a valid entity name.
Volume cannot be zero or negative.	Volume cannot be zero or negative.
Volume value cannot be negative	Volume value cannot be negative.
Tonnes, Volume and Density are Invalid	Tonnes, Volume and Density must either all be zero, or all be greater than zero
Wet Tonnes cannot be zero or negative.	Wet Tonnes cannot be zero or negative.

Adjustment date cannot be in the future

Invalid Attribute Value

Attribute value must be numeric.

Unknown Attribute

Attribute name (or the category value) is invalid for this attribute assignment.

Attribute value not in allowed range.

The attribute value provided was outside of the allowed range defined against the attribute.

Block Model Type Id is set to Unknown.

Block Model Start Date is not present when End Date has been specified.

The block model name was not specified.

The block model name was not specified. Please amend the mapping or update the data.

Block Model Start Date is after the End Date.

Both percentages required

Both the opening and closing percentage must be specified.

Both volumes required

Both the opening and closing volumes must be specified.

Calculated Density must be greater than or equal to 1 and less than or equal to 10

Calculated Density has value that is not between 1 and 10.

Cannot modify approved data

Time-based data which occurred prior to and including the Data Approval date/shift cannot be modified. This data must be unapproved before making any changes.

Cannot delete approved block

Cannot delete block because it is referenced by approved data.

Cannot delete model cell

Cannot delete model cell because it is referenced by a model survey.

Volume mismatch

Opening volume for the cell does not match the corresponding closing volume of the previous period.

Closing volume is too great

Closing volume must be less than or equal to the opening volume.

Closing Volume exceeds Previous Minimum Closing Volume

Control Point External System ID required.

An External System ID is required for this Control Point.

Control Point Misclassification (Crusher to Crusher).

Invalid source and destination combination (Crusher to Crusher).

Control Point Name required.

A name is required for this Control Point.

Density must be greater than or equal to 1 and less than or equal to 10

Density has value that is not between 1 and 10.

Destination entity has a name and no type

Destination entity has a name but also required an entity type.

Destination Entity Type cannot be resolved.

Destination material type is required

Destinations with an unknown or unspecified entity must define a material type if the entity type is known.

Dry Tonnes cannot be zero or negative.

Dry Tonnes greater than Wet Tonnes.

Dry Tonnes cannot be greater than Wet Tonnes.

Duplicate Entity In Survey

An entity has been referenced multiple times in the same survey.

Duplicate external system Id

There is one or more duplicate external system Ids.

Duplicate Mine Plan Value external system Id

There is one or more duplicate Mine Plan Value external system Ids.

Duplicate Stockpile Adjustment

Multiple Stockpile Adjustments for this stockpile and date/shift are present in the import.

Duplicate Surveys have been detected.

Duplicate Surveys with the same name and parent location have been detected.

End date later than plan end date

The mine plan value end date cannot be later than the mine plan end date.

Entity Start Date Shift Id is not present when End Date Shift Id has been specified.

Model Cell could not be found

The Model Cell could not be resolved for the specified block model.

The Entity Name already exists as a Haulage Alias.

The Entity Name already exists as a Haulage Alias. The Haulage Alias must be deleted before an Entity can be created with this name.

Opening Tonnes cannot be negative

Opening Tonnes cannot be negative.

Opening Volume cannot be negative

Opening Volume cannot be negative.

Entity Start Date Shift Id is after the End Date Shift Id.

Error Tracking Limit Exceeded Format String Name

External System Id is required.

Failed To Convert Field Validation Name

Field Exceeds Maximum Length Validation Name

Field Is Mandatory And No Value Supplied Validation Name

Field Is Not of the Exact Length Validation Name

Field Is Shorter Than Minimum Length Validation Name

Gap exists between the end of the last model survey and the start of this model survey

There was a gap between the end of the last model survey and the start of this model survey (%ModelSurveyName%).

Grade cannot be negative

Grade value is less than 0.

Grade '%GradeName%' value is less than 0. Grade Id: %GradeId%.

Haulage Misclassification (Crusher to Crusher).

Haulage invalid source and destination combination (Crusher to Crusher).

Haulage must have Tonnes or Volume specified.

Import Measure Type Invalid

Import Measure Type must be a valid string that match one the names in Import Measure Type Table

Import Measure Type is not allowed

Import Measure Type other than 'Raw' is allowed only when Mass Balancing option is set to 'Imported Value'

Invalid Entity Group Name

The specified entity group name does not match any existing groups.

Invalid Value

'%ARG%' is not a valid floating point number.

Invalid Polygon

Polygon is invalid. The polygon has one or more points that is either duplicated or failed validation.

Missing Value

'%ARG%' is required.

Lookup failed

Record lookup has failed with '%Message%' message.

Unknown Block Model

Mine plan cannot reference unknown Block Model ID. Please check the block model name, block model type and parent location specified.

Mine plan could not be resolved

The ID of the mine plan could not be resolved.

Missing source or destination details

One of Source Entity, Source Entity Type, Destination Entity or Destination Entity Type is required.

Mine plan type is required

Mine plan type is required.

Mine plan value cannot be resolved

This grade cannot be associated with a mine plan value.

Grade %GradeName% not found.

Grade for Mine plan value is not valid.

Model Cell Load Invalid Data Type

Model Cell Load Invalid Data Type Details

Unknown Block Model

Model Survey cannot reference unknown Block Model Id.

Unknown Survey Type

Model Survey cannot accept invalid Survey Type Id.

Unknown Time Period

Model Survey cannot reference an unknown Time Period Id.

Moisture value is not valid

Moisture must be within the range 0-99.

No Moisture grade exists.

A grade of type Moisture has not been defined in the system.

Entity has null Density.

Density value is required and cannot be calculated using Tonnes and Volume.

Entity has null Tonnes.

Tonnes value is required and cannot be calculated using Volume and Density.

Depletion tonnes invalid

Tonnes value is required and cannot be calculated using Volume and Density.

Tonnes value is required

Tonnes value is required and cannot be calculated using Volume and Density.

Volume is required

Volume value is required and cannot be calculated using Tonnes and Density.

Entity has null Volume.

Volume value is required and cannot be calculated using Tonnes and Density.

Plan Start Date is after Plan End Date

Plan Start Date is after Plan End Date.

Plan Transaction Start Date is after Plan Transaction End Date

Plan Transaction Start Date is after Plan Transaction End Date.

Duplicated Values

There are one or more duplicate points with exact same polygon name and point index.

A Raw Movement cannot be found.

A Raw Movement cannot be found for the specified External System Id.

Non-primary Raw Movement Grade could not be resolved.

Raw Movement Grade must not be negative.

Raw Movement Grade must be greater than or equal to 0.

Measurement Date Time could not be calculated

Measurement Date Time could not be calculated. Please verify the Raw Movement Start and End Date is valid and the Start and End Shift is a valid Shift.

Raw Movement Measurement Start and End Date missing.

Raw Movement Measurement Start and End Date cannot be missing.

Measurement Start Date after End Date

Measurement Start Date cannot be after End Date

Raw Movement record must specify Source and Destination Name.

Secondary Grade name was not recognised.

A grade was specified that does not match any secondary grades configured for the system. Secondary grades must not belong to the Primary/Head grade group.

Source entity has a name and no type

Source entity has a name but also required an entity type.

Source Entity Type cannot be resolved.

Source material type is required

Sources with an unknown or unspecified entity must define a material type if the entity type is known.

Start date earlier than plan date

The mine plan value start date cannot be earlier than the mine plan start date.

Stockpile Adjustment must be for a valid Stockpile

Stockpile Adjustment must be for a valid Stockpile.

Stockpile adjustment manual entry exists.

A manual stockpile adjustment for this stockpile and dateshift already exists and cannot be overwritten by import

Stockpile Adjustments must set tonnes or volume or grade values

Stockpile Adjustments must set tonnes or volume or grade values.

A single stockpile adjustment cannot reset both tonnes and volume

A single stockpile adjustment cannot reset both tonnes and volume.

Survey Stockpile Adjustments must set volume

Survey Stockpile Adjustments must set volume.

Survey Stockpile Adjustments cannot set grades

Survey Stockpile Adjustments cannot set grades.

Survey Stockpile Adjustments cannot set tonnes

Survey Stockpile Adjustments cannot set tonnes.

Stockpile is not open at adjustment date

Volume mismatch

Opening volume for the sub cell does not match the corresponding closing volume of the previous period.

Survey Stockpile Adjustment must have a volume specified

Survey type can't be null

The survey type id cannot be null.

Time Period cannot be found

Unable to find a Time Period associated with this record.

Time period name does not match.

Time Period name does not match with the mapped start date and end date.

Time Period overlaps

Time Period cannot overlap an existing Time Period of the same type.

Time Period Start Date is after End Date.

Tonnes, Volume, Density mismatch.

Tonnes, Volume, Density mismatch. The calculated result of Tonnes divided by Density should be within 5% of the entered Volume. Please make the appropriate adjustment.

Tonnes value cannot be negative

Tonnes value cannot be negative.

Transport Shipping must have Tonnes or Volume specified.

Mass by moisture basis cannot be calculated

To calculate moisture basis, two or more of the following fields must be provided: Wet Tonnes, Dry Tonnes and Moisture.

Unclosed Polygon

Polygon must be closed and having the last point coordinate equals to the first point.

Invalid Entity Name

Unable to resolve entity. Please provide a valid entity name.

Volume cannot be zero or negative.

Volume value cannot be negative

Volume value cannot be negative.

Tonnes, Volume and Density are Invalid

Tonnes, Volume and Density must either all be zero, or all be greater than zero

Wet Tonnes cannot be zero or negative.