Command Help project-points-to-wf

 

Command Name	Menu	Quick Key	Link to Command Table
project-points-to-wf	Edit ribbon | Project | Project | Points to Wireframe	ptp	Click here

Description

Project the selected point(s) vertically onto the uppermost surface of the current wireframe object.

The points are projected vertically, regardless of: the current view direction whether or not the wireframe is displayed in the view i.e. wireframe overlay objects which are not displayed are also used when points are projected .

 

How to Use

1. Select the current wireframe object.

   There are two ways of defining the current object: In the Current Objects tool bar, selected the Object Type, in the Current Object drop-down, select the required obect. In the Loaded Data control bar, double-click the required object (it should then be displayed with bold text).

2. Select a point(s).

3. Run the Command.

4. The point(s) will be moved to the uppermost wireframe surface.

 

 The example below shows the position of selected points before (left) and after (right) projection:

Figure 1: Points before projection

Figure 2: Points after projection