MODSPLIT Process

What does it do?	How to access this process	Link to Command Table
Splits a Datamine cell/subcell model using an input wireframe.	Use the Command line	Click here

Topic Contents

Introduction
Input Files
Output Files
Fields
Parameters
Example
Errors

Process Overview

Note: This is a superprocess and running it may have an effect on other Datamine files in the project.

MODSPLIT splits a Datamine cell/subcell model using an input wireframe to create a new model that is constrained by the wireframe.

Either a solid wireframe with multiple closed volumes or a digital terrain model wireframe can be used. The volume of the wireframe is accurately represented in the split model. An optional output model FULLMOD may be specified. This is a model that covers the same total volume as the input model but with cell splitting to model the wireframe volumes. The input wireframe may contain multiple wireframes that are identified using the *ZONE field in the wireframe triangle file. The *ZONE values will then be included in the output model files.

MODSPLIT is useful for situations in which you have a mine design or mineable shapes in the form of wireframe and you wish to quickly represent those within a reserve block model. You can choose to output a model containing just the cells constrained by the wireframe shapes (MODELOUT) or the whole model (FULLMOD). The resulting model can then be used in processes such as TONGRAD to produce reserves tables.

The input model may be rotated. If the input model &PROTO is a Rotated Model, as defined using the PROTOM process, then the coordinates of the input points in the &WIREPT file are automatically transformed internally to the rotated model coordinate system for processing.

If both the input model file and the input wireframe triangle file include field ZONE then to avoid confusion in the output model files field ZONE from the input model file will be renamed asMD_ZN_n in the output model files. n is an index from 0-9. The first replacement name will be MD_ZN_0. If it already exists then MD_ZN_1 will be used and so on.

Field Types

There are two special field types that can be selected as described below. All other non-selected field values will be copied to the output model(s).

Additive Fields

If the input model includes additive fields (for example costs or revenues) then these must be explicitly identified using the *ADDF1 - *ADDF9 fields. These fields will then be treated appropriately where the cells are split by the wireframe.

Grade Averaged Fields

MODSPLIT has the option to adjust the grades in the output model cells to be the average grade within each wireframe zone. To output average grades the fields *AVGF1 to *AVGF9 can be specified.

The calculation of average grades within cells that are not constrained by the wireframes is controlled by the @DEFGRADE parameter.

If @DEFGRADE >= 0 then unconstrained cell grades are set to that value for all selected fields
If @DEFGRADE = -1 then unconstrained cells are assigned the average grade of all the unconstrained cells regardless of ZONE.
If @DEFGRADE is not set or set to absent data (-) then unconstrained cells grades are unchanged from the input model.

Note: If @DEFGRADE is used to set a default grade when averaging then the total grade of the output model will usually NOT be the same as the input model.

Input Files

Name	Description	I/O Status	Required	Type
MODELIN	Input model file.	Input	Yes	Block Model
WIRETR	Input wireframe triangle file used to split the model cells.	Input	Yes	Wireframe
WIREPT	Input wireframe point file.	Input	Yes	Wireframe

Output Files

Name	I/O Status	Required	Type	Description
MODELOUT	Output model file to be created that contains only cells constrained (and split) by the input wireframe. Which cells are written to this model depends on the @MODLTYPE parameter.	Yes	Input	Block Model
FULLMOD	Output full model file to be created. This model covers the same volume as the input model but it has split cells where the original cells intersect the input wireframes. Cells constrained by the wireframe are flagged with a ZONE value depending on field value of *ZONE and the parameter @ZONE.	Yes	Input	Block Model

Fields

Name	Description	Source	Required	Type	Default
ZONE	Name of zone field, if any, in input wireframe with multiple zones. If the field is specified then it is created in the output model file with the corresponding zone value as defined by the wireframe. The field can be either numeric or 4 character alpha. If not specified and a field ZONE exists in WIRETR then it will automatically be used.	WIRETR	No	Undefined	Undefined
MINED	Optional field to be added to the output full model. Cells constrained by the wireframes will have a value of 1, cells outside or not constrained by the wireframes will have a value of zero		No	Numeric	Undefined
ADDF1 to ADDF9	Field(s) to be treated as additive(s) e.g. cost and revenue values.	MODELIN	No	Numeric	Undefined
AVGF1 to AVGF9	MODSPLIT has the option to adjust the grades in the output model cells to be the average grade within each wireframe zone. To output average grades the fields AVGF1 to AVGF9 can be specified. The calculation of average grades within cells that are not constrained by the wireframes is controlled by the @DEFGRADE parameter.	MODELIN	No	Numeric	Undefined
DENSITY	Density field in the input model file to be used when averaging grade fields. If this is not set and a DENSITY field exists in the model file it will be used. Otherwise Density is specified using the DENSITY parameter.	MODELIN	No	Numeric	DENSITY

Parameters

Name	Description	Required	Default	Range	Values
MODLTYPE	Type of wireframe model to be filled; one of the following options, with default of (1) :- =1 : solid 3d, interior to be filled with cells. =2 : solid 3d, exterior to be filled with cells. =3 : surface, cells to be filled below (for XY), to south (for XZ), or to west (for YZ). =4 : surface, cells to be filled above (for XY), to north (for XZ), or to east (for YZ). =5 : fill between two surfaces with cells.. =6 : two surfaces, cells to be filled above upper surface and below lower surface.	Yes	1	1,6	1,2,3,4,5,6
ZONE	Zone code to be inserted into output model ZONE field if field does not exist in input wireframe model.	No	0
MAXDIP	Reference gradient used to calculate the degree of cell splitting as described in the Full Description (0).	No	0	0,90
SPLITS	Maximum amount of splitting to be allowed (3). =0 : no splitting: parent cell. =1 : 1 split: 2 x 2 subcells. =2 : 2 splits: 4 x 4 subcells. =3 : 3 splits: 8 x 8 subcells.	No	3	1,3	1,2,3
PLANE	Optional alpha parameter defining orientation 'XY', 'XZ', or 'YZ', of plane in which subcell splitting is to be performed. Care must be taken in selection of the plane to be used if the ends of the wireframe have not been linked, as the wireframe model is then partially 'hollow' when viewed from certain directions.	No	XY		XY, XZ, YZ
XSUBCELL	Number of subcells in X direction (1). Max 100. Only used if SPLITS=0.	No	1	1,100
YSUBCELL	Number of subcells in Y direction (1). Max 100. Only used if SPLITS=0.	No	1	1,100
ZSUBCELL	Number of subcells in Z direction (1). Max 100. Only used if SPLITS=0.	No	1	1,100
RESOL	Defines boundary resolution in direction perpendicular to plane of filling. =0 : precise boundary location. =N : boundary rounded to nearest 1/Nth of parent cell size.	No	0	0,N
DENSITY	Default Density value to be used when averaging grades. This is used if there is no DENSITY field in the input block model or if Density values in the model are absent.	No	1
DEFGRADE	The calculation of average grades within cells that are not constrained by the wireframes is controlled by the @DEFGRADE parameter. If @DEFGRADE >= 0 then unconstrained cell grades are set to that value for all selected fields If @DEFGRADE = -1 then unconstrained cells are assigned the average grade of all the unconstrained cells regardless of ZONE. If @DEFGRADE is not set or set to absent data (-) then unconstrained cells grades are unchanged from the input model	No	-
USEZONE	If the wireframe triangle file includes field ZONE then by default MODSPLIT will use it for zone control unless a different zone field is explicitly selected. Parameter @USEZONE has been introduced to allow field ZONE to exist in the triangle file but not used for zone control. If field ZONE exists in the triangle file but is not to be applied set @USEZONE=0 If field ZONE exists in the triangle file and is to be applied then select it explicitly or set @USEZONE=1	No	1	0,1	0,1
TOLERNCE	Defines the smallest cell that will be included in OUT. Defined as a factor XINC, YINC, ZINC.	No	0.001	undefined	undefined

Example

!MODSPLIT

&MODELIN(MODEL),

&WIREPT(TOPOPT), &WIRETR(TOPOTR),

& MODELOUT(SPLITMOD), *ZONE(ROCK),

@MODLTYPE=1, @MAXDIP=0, @SPLITS=0, @PLANE='XY',

@XSUBCELL=2, @YSUBCELL=2, @ZSUBCELL=2, @RESOL=2,

@ZONE=1, @DENSITY=2, @DEFGRADE=-

Error and Warning Messages

>>>	WARNING - DATA ABOVE TOP OF MODEL <<<
>>>	ERR 132 <<< ( n) IN TRIFIL
	Data in the input wireframe point data file has been found to be above the top of the model. Warning; processing continues.
>>>	WARNING - DATA BELOW BOTTOM OF MODEL <<<
>>>	ERR 133 <<< ( n) IN TRIFIL
	Data in the input wireframe point data file has been found to be below the bottom of the model. Warning; processing continues.
>>>	NO DATA IN INPUT FILE <<<
>>>	ERR 136 <<< ( n) IN TRIFIL
	The input wireframe point data file has no data. Fatal; the process is exited.
>>>	MISSING OR ALPHA FIELDS IN MODEL PROTOTYPE <<<
>>>	ERR 142 <<< ( n) IN TRIFIL
	Fatal; the process is exited.
>>>	ERR 143 <<< ( n) IN TRIFIL
	Fatal; the process is exited.
>>>	MISSING OR ALPHA FIELDS IN WIREPT FILE <<<
>>>	ERR 145 <<< ( n) IN TRIFIL
	Fatal; the process is exited.
>>>	MISSING OR ALPHA FIELDS IN WIRETR FILE <<<
>>>	ERR 146 <<< ( n) IN TRIFIL
	Fatal; the process is exited.