Command Help

link-boundary

 

Command Name

Menu

Quick Key

Link to Command Table

link-boundary

Structure ribbon | Create | Link | Link Boundary

lbo

Click here

Description

Creates a wireframe link between two perimeters (closed strings) honouring any boundary/bridge strings.

This command is used to link multiple perimeters when creating bifurcated or split wireframes.

How to use

  1. In the Current Objects toolbar, select or create a new current wireframe object.

  2. Run the command.

  3. Following the prompts in the Status Bar, select a first point on the perimeter (the one which has associated boundary/bridge strings).

  4. Select a second corresponding perimeter.

  5. Repeat step 3 and 4 for all 'bounded perimeter'  to perimeter pairs.

  6. Click Cancel.

  7. Link the remaining perimeters or strings using the related link-boundary-to-line, end-link-boundary or any other relevant string linking commands.
     

Example

In the example below, the bottom perimeter will be linked to the top perimeters, using the link-boundary command, honoring the red boundary strings:

 

Each portion of the lower perimeter is linked to the corresponding perimeter in the top i.e. the perimeters are selected in pairs:

 

 

The remaining two bifurcations are linked in the same way:

 

note.gif (1017 bytes)

  • At least one of the two strings selected for linking must have at least one bridge string connected to it.

  • More than one bridge string may be connected to a string for linking.

  • A bridge string is a string that has both its first and last points connected to points on one of the two strings which are to be linked.

  • The tag or boundary/bridge strings must have their end points snapped (point or line) to a perimeter.

  •  Bridge strings can contain any number of points and be fully three dimensional, but their end points must be connected to points on one of the selected strings. Crossovers of bridge strings should be avoided. The bridge strings themselves are not selected when running this command, they are automatically detected.

  • The 'trouser leg' scenario: 

note.gif (1017 bytes)

Using this command in conjunction with the 3D Solid linking method.

If you have strings on adjacent sections that are to be linked together, and those strings cross each other when viewed in the direction of wireframing, then temporary vertices are inserted into the string and these temporary vertices are used when the wireframe is created.  Since pairs of strings are wireframed at a time it is possible for these temporary vertices to be created for one pair of strings and not the other.  In this situation a wireframe may be built which contains inconsistencies.  Therefore the 3D-Solid method is not suitable for use with the older linking commands if adjacent sections contain strings that cross each other in the direction of wireframing.

More about the 3D Solid linking method...

 

note.gif (1017 bytes)
  • The links take their color from the first string of each string-pair used for the linking.
  • Various settings can be used to control linking, seeWireframe Linking Settings.
  • Tag strings can be used to control linking, see use-tag-switch.
  openbook.gif (910 bytes)   Related Topics

 

link-boundary-to-line
end-link-boundary