Command and Processes Table - B

These tables list all commands and processes available in all Datamine Studio products. If your product has access to a command or process, the link on the left of the table displays a help file. If no link appears, the function isn't available in your product.

Symbols used in this table:

A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.

X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).

� A blue diamond indicates the module is an optional extra for the specified system.

Note: For an explanation of the terms 'command', 'process' and 'macro command', see Command Table Introduction.

For Macro commands, see here.

Commands - B

Command Name								Description	More Help
berm-inside-taper-distance	X	X	X	X			X	Reduces the width of the berm where the berm meets the road in an open pit design.
berm-inside-taper-switch	X	X	X	X			X	Toggles the use of tapering in berm creation on the inside of the road.
berm-outside-taper-distance	X	X	X	X			X	Gradually reduces the width of the berm where the berm meets the road.
berm-outside-taper-switch	X	X	X	X			X	Toggles the use of tapering in berm creation on the inside of the road.
berm-string-colour	X	X	X	X			X	Sets the colour for berm strings in an open pit design.
berm-to-wf-switch	X	X	X	X			X	Toggles wireframe intersection when creating a berm.
blast-layout			X	X	X	X	X	Layout a blast pattern within a perimeter to create a new set of drillholes	Command Help
blast-layout-between-wf			X	X	X	X	X	Layout a blast pattern between wireframe limits to create a new set of drillholes.	Command Help
blast-layout-from-wf			X	X	X	X	X	Layout a blast from a surveyed wireframe surface.	Command Help
blast-layout-interactive			X	X	X	X	X	Use a simple wizard to lay out a blast pattern.	Command Help
blend-fam-faces-switch	X	X	X	X	X	X	X	Toggle on or off the use of mining faces when blending.
blend-mining-blocks	X	X	X	X	X	X	X	Blend selected blocks according to specified targets.
blend-proportion-switch	X	X	X	X	X	X	X	Toggle switch for blending based on proportional mining.
borehole-warning-report								Check proximity and intersections of drillholes with wireframe surfaces	Command Help
box-all-points-inside-switch								Control whether string is selected if all points lie within selection box.	Command Help
box-any-points-inside-switch								Control whether string is selected if any point lies within selection box.	Command Help
break-string								Breaks a string at a selected point	Command Help
break-string-with-string								Break a string where it is crossed by another selected control string.	Command Help
break-strings								Breaks a string where it is crossed by any other string.	Command Help
build-holes								Create a set of desurvey holes from loaded raw drillhole collar, survey and other data.	Command Help

Processes - B

Process Name							Description	More Help
BACKTR	X	X	X	X	X	X	The process back-transforms data from a normal distribution.	Process Help
BHCOUNT				X		X	This command counts the number of boreholes used to estimate each model cell.	Process Help
BLKPER						X	Creates a set of perimeters around blocks in a model file.	Process Help
BLKTRI						X	Converts block model(s) to wireframe surfaces(s).	Process Help
BOOLEAN						X	Access Boolean wireframing functions.	Process Help