rings-move-rig

See this command in the command table.

To access this command:

• Using the command line, enter "rings-move-rig" and press ENTER.

• Display the Find Command screen, locate rings-move-rig and click Run.

Command Overview

Often, it is necessary to reposition the rig within the drill drift outline, or to align it with another survey reference string.

This command is used to move a drill rig within the drill drift outline.

Command steps:

1. Run the command.

2. Select a survey reference string (or the drill outline if you don't plan to use one).

3. Reposition the rig in exactly the same way as you did it initially.  

   Tip: Right click to position the rig directly below the survey line, and the rig base will automatically snap to the floor of the drift when within range.

   The Specify Rig Movement screen displays.

4. Adjust X and Y distances.

5. Click OK.