Configure Model Validation QQ Plots

Model Validation QQ Plots can be configured using the QQ Plot tab in the Property Panel.

Activity Steps

1. Select the Model Validation QQ Plot from the Project Tree.
2. Select the QQ Plot tab n the Property Panel.
3. Configure the following options as required.
   • Draw field group:
     • Show Estimate Means
     • Show Naive Mean
     • Show Declustered Mean – Only available if a Decluster component is present.
     • Show Theoretical Mean – Mean of the theoretical Selective Mining Unit (SMU) data. Only available if Global Change of Support (GCoS) has been enabled on a neighbouring Grade Tonnage (GT) Curve.
     • Log Scale – Use a logarithmic scale.
     • Use Same Scale For Both Axes
   • Series Options field group – Select which data series to display on the plot.
   • SMU Options field group:
     • Grade-Tonnage Curve – Select the GT Curve from which theoretical SMU results are obtained.
     • Show Theoretical SMU series – Only available if GCoS has been enabled on a neighbouring GT Curve.

       Note: The colour of the Theoretical SMU series is always the same as the colour of the Theoretical Mean line, configured in the Draw section.