Configure Conditional Simulation Grade Tonnage Curve Draw Properties

The Draw tab controls the drawing options for GT plots inserted under Conditional Simulation components.

Activity Steps

1. Select the GT Curve component from the Project Tree.
2. Select the Draw tab in the Property Panel.
3. Configure the following options as required.
   • Domain Filter – Select the domain to display on the plot.
   • Series Options field group – The options in this group are only available when the relevant tab is selected in the Main Canvas or the relevant data is added.
     • Simulations – Display all simulations.
     • Average – Display the average (E-type) simulation.
     • Predicted GT Curve
     • BM 1 – Display block model 1 series.
     • BM 2
     • BM 3
   • Draw Options field group:
     • Show raw tonnage values – Show raw tonnage value instead of Kilotonnes on the plot.
     • Use alternative draw style – Draw the grade tonnage curve in an alternative style, with the grade on the Y-axis and the tonnage on the X-axis
     • Show cut-off labels - Only available if Use alternative draw style is checked.
     • Label Font Size – Only available if Show cut-off labels is checked.
     • Label Precision – Only available if Show cut-off labels is checked.
   • Envelope field group – Only available when the GT Envelope tab is selected in the Main Canvas.
     • Envelope – Display the GT envelope.
     • Upper – Display the upper percentile on the plot. Enter a number to define the value.
     • Lower
     • Show Simulation Number
     • Median
     • Show Box-and-whisker