Configure Probability Cut-Off Settings

The Probability CutOff tab controls the grade probability plot outputs for conditional simulation.

Activity Steps

1. Select the Probability Cut-Offs component from the Project Tree.
2. Select the Probability CutOff tab in the Property Panel.
3. Configure the following options as required.
   • Cut-Off Settings field group:
     • Start – Start value for the Cut-Off Values Table.
     • End – End value for the Cut-Off Values Table.
     • Step – Steps between values in the Cut-Off Values Table.
     • Clear Table – Clear all values from the Cut-Off Values Table.
     • Add Cut-Offs – Populate the Cut-Off Values Table.

       Note: Clicking Add Cut-Offs inserts values at the bottom of the Cut-Off Values Table using the parameters set in the Cut-Off Settings field group. To replace the values, click Clear first.

     • Apply Cut-Offs
     • Cut-Off Values Table
   • Parameters field group:
     • Use Reblocked Model
     • Height(RL) Of First Bench – Relative Level of first bench.
   • View field group:
     • Orientation – Select the view orientation of models in the Main Canvas from XY, XZ and YZ.
     • Set Elevation
     • Axes maintain same scale
   • Stats field group:
     • Mean Above Cut-Off – Display mean above cut-off on plots.
     • Mean Below Cut-Off – Display mean below cut-off on plots.
     • Decimals – Number of decimals displayed for mean above cut-off and mean below cut-off.