Pattern Properties

To display the properties of a pattern, select the pattern boundary in the Viewport. The Properties Pane displays the following properties for patterns.

You can also define Custom Properties for hole patterns.

Label Display Properties

Property	Description
Pattern Label Angle	Editable in design, this is the leader for the pattern ID orientation. Altering the pattern label angle is useful where multiple and overlapping pattern types are viewed.
Pattern Label Text Height	Text height for the pattern ID.

Measure Properties

Property	Description
Charge Cover over Wet Wall	For the bottom charge deck, the length of the charge deck that extends past or above the wet wall level. This property considers the explosive degradation caused by wet walls.

Volumes and Spacing Properties

Property	Description
Average Bench Height	Average bench height, calculated as the average excavation depth of the holes in the pattern.
Average Burden	Average burden of the holes in the pattern. Editable.
Average Spacing	Average spacing of the holes in the pattern. Editable.
Design Explosive Mass Total	Total explosive mass of the pattern, as designed.
Volume (Design)	Volume of the pattern, as designed. Editable.
Volume (Excavated)	Volume of the pattern, as excavated. Editable.

Drill Properties

Property	Description
Completed Drilling	Whether the drilling of the pattern has been completed. Editable.
Subdrill/Standoff	The intended subdrill or standoff value. Editable.

Charge Properties

Property	Description
Blast Date	Date of the blast. Editable.
Blast Date Time	Date/time stamp of the blast. Editable.
Blast Number	Number assigned to the blast. Editable.
Design Checked By	Name of the design reviewer. Editable.
Max Flyrock with FOS	Calculated maximum flyrock range with factor of safety of a firing pattern.
Shot Designed By	Name of the blast designer. Editable.

Misc Properties

Property	Description
Average As Built Charge Toe RL	Calculated average relative level (RL) of the as-built charge toe of holes.
Average As Built Collar RL	Calculated average relative level (RL) of the as-built collar of holes.
Average As Built Toe RL	Calculated average relative level (RL) of the as-built toe of holes.
Average Density	Average density of the blasted rock. Editable.
Average Design Charge Toe RL	Calculated average relative level (RL) of the as-designed charge toe of holes.
Average Design Collar RL	Calculated average relative level (RL) of the as-designed collar of holes.
Average Design Drill Depth	Calculated average depth of design holes.
Average Design Toe RL	Calculated average relative level (RL) of the as-designed toe of holes.
Average RL	Average RL of the hole toes. Editable.
Blast Volume	Volume of the blast, calculated as the pattern area multiplied by the average bench height.
Blasted Rock Weight	Weight of the in-situ blasted rock, calculated as the blast volume multiplied by the average density.
Count	Number of holes in the pattern.
Drill Pattern Blast Type	Drill pattern blast type of the applied charge rule.
Hole Count	Number of holes in the pattern.
In Use	Whether the pattern is in use or has been archived. Editable
Is Live	Whether the pattern is live. Live patterns are synchronised to BlastPad.
Name	Name of the pattern. Editable
Notes	Comments about the pattern.
Pattern Area	Area of the pattern. Editable.
Pattern Boundary Area	Area of the pattern boundary, which is the polygon that surrounds the holes in the pattern.
Pattern Burden/Spacing Area	Area of the pattern, calculated as the average burden multiplied by average spacing and the hole count.
Stemming Length	Length of stemming that is required. Editable.
Total Design Drill Depth	Sum of design drill depths of all holes.
Total Drilled Depth	Sum of as-drilled depths of all holes.
Total Remaining Drill Depth	Remaining drill lengths that are not yet drilled, calculated as the total design depth minus the total drilled depth.