Generate and Print a Burden Report

A burden report is a report of how close selected holes are to the front face of the topographical surface. The report is designed to be printed.

The design and content of the report is fully customisable. A typical burden report may have a summary of how many holes are in specification, short and long. For each hole, the report includes the burden review diagram showing the minimum and maximum burden distances around the explosive column.

Activity Steps

1. Select the Design module.
2. Right-click a drill pattern in the DataBlast Items Tree and select Edit Selected Drill Pattern in Designer from the menu.

   The drill pattern displays in design mode.

3. Run a Burden Check.
4. On the Burden Check Ribbon Menu, click Burden Report.

   The Report Designer screen displays a print preview of the burden report.

   Note: If there is more than one Burden Report report template (see Maintain Report Templates), the Report Template Selection screen displays. Select the required template and click Select.

5. To print the report, click Print and adjust print settings as required.
6. To edit the design of the report or maintain report templates, see Maintain Report Template Designs.