Pattern Properties
The Properties Pane displays the following properties for patterns.
Label Display Properties
| Property |
Description |
|---|---|
|
Pattern Label Angle |
Editable in design, this is the leader for the pattern ID orientation. Altering the pattern label angle is useful where multiple and overlapping pattern types are viewed. |
|
Pattern Label Text Height |
Text height for the pattern ID. |
Measure Properties
| Property |
Description |
|---|---|
|
Charge Cover over Wet Wall |
For the bottom charge deck, the length of the charge deck that extends past or above the wet wall level. This property considers the explosive degradation caused by wet walls. |
Volumes and Spacing Properties
| Property |
Description |
|---|---|
|
Average Bench Height |
Average bench height, calculated as the average excavation depth of the holes in the pattern. |
|
Average Burden |
Average burden of the holes in the pattern. Editable. |
|
Average Spacing |
Average spacing of the holes in the pattern. Editable. |
|
Design Explosive Mass Total |
Total explosive mass of the pattern, as designed. |
|
Volume (Design) |
Volume of the pattern, as designed. Editable. |
|
Volume (Excavated) |
Volume of the pattern, as excavated. Editable. |
Drill Properties
| Property |
Description |
|---|---|
|
Completed Drilling |
Whether the drilling of the pattern has been completed. |
|
Subdrill/Standoff |
The intended subdrill or standoff value. |
Charge Properties
| Property |
Description |
|---|---|
|
Blast Date |
Date of the blast. Editable. |
|
Blast Date Time |
Date/time stamp of the blast. Editable. |
|
Blast Number |
Number assigned to the blast. Editable. |
|
Design Checked By |
Name of the design reviewer. Editable. |
|
Shot Designed By |
Name of the blast designer. Editable. |
Misc Properties
| Property |
Description |
|---|---|
|
Average Density |
Average density of the blasted rock. Editable. |
|
Average Design Drill Depth |
Calculated average depth of design holes. |
|
Average RL |
Average relative level (RL) of the hole toes. Editable. |
|
Blast Volume |
Volume of the blast, calculated as the pattern area multiplied by the average bench height. |
|
Blasted Rock Weight |
Weight of the in-situ blasted rock, calculated as the blast volume multiplied by the average density. |
|
Count |
Number of holes in the pattern. |
|
Drill Pattern Blast Type |
Drill pattern blast type of the applied charge rule. |
|
Hole Count |
Number of holes in the pattern. |
|
In Use |
Whether the pattern is in use or has been archived. |
|
Is Live |
Whether the pattern is live. Live patterns are synchronised to . |
|
Name |
Name of the pattern. |
|
Notes |
Comments about the pattern. |
|
Pattern Area |
Area of the pattern in square metres. Editable. |
|
Pattern Boundary Area |
Area of the pattern boundary, which is the polygon that surrounds the holes in the pattern. |
|
Pattern Burden/Spacing Area |
Area of the pattern, calculated as the average burden multiplied by average spacing and the hole count. |
|
Stemming Length |
Length of stemming that is required. Editable. |
|
Total Design Drill Depth |
Sum of design drill depths of all holes. |
|
Total Drilled Depth |
Sum of as-drilled depths of all holes. |
|
Total Remaining Drill Depth |
Remaining drill metres that are not yet drilled, calculated as the total design depth minus the total drilled depth. |
