Configure Drill Integration Fault Reprocessing Times

Configure reprocessing times if faults should be reprocessed as a batch; for example, at a time of day when drilling is likely to be complete. If you do not configure reprocessing times, faults are reprocessed at calculated times.

Note: This activity is not needed for WencoMine because that interface uses a database timestamp to identify which log entries need to be processed. See Configure WencoMine Drill Integration.

Activity Steps

1. On the DataBlast Application Menu, select Site Maintenance.

   The Site Maintenance screen displays.

2. Select the Service Control node.
3. Select the Drill Machine Import » IMS Reprocessing Times tab.
4. To add a reprocessing time:
   1. Click Add Process Time.
   2. Enter the Time of Day in the format HH:MM:SS.
   3. Select the Drill Machine System to Reprocess from Atlas Copco, Atlas Copco Auto, Carlson, Flanders, IMS, Jigsaw, MiPlan, Modular, Terrain, WencoLite and WencoMine.

      Note: You can select multiple systems for each reprocessing time, and you can select both active and inactive drill machine integrations in this configuration.

5. To remove a reprocessing time:
   1. Click the arrow row selector for the time.
   2. Press Delete (on your keyboard).

      A confirmation message displays.

   3. Click Yes.
6. Click Save Changes.