Export Charge Standards

Note: G-Blast charge standard configuration includes strata (also known as seams). These strata are not exported because they relate to geological data specific to a site. If you export a G-Blast charge standard, dependent G-Blast components and the conventional charge standard that is used when there are no strata intersections are exported. If you import that exported G-Blast charge standard, you need to edit it to select appropriate strata before the G-Blast charge standard diagram can display and the G-Blast charge standard can be used. See Maintain G-Blast Charge Standards.

Activity Steps

1. On the DataBlast Application Menu, select Site Maintenance.

   The Site Maintenance screen displays.

2. Select the Charge Standards » Conventional or Charge Standards » G-Blast node.
3. On the Charge Standard Maintenance Ribbon Menu, click Export Charge Standards.

   The Charge Standards Export screen displays all conventional and G-Blast charge standards.

4. To filter the list:
   1. Select the Type from All, Conventional, G-Blast, G-Blast Above Strata, G-Blast Between Strata and G-Blast Below Strata.
   2. Select the System from All, Electronic and Non-Electric.

   Note: Any selected charge standards display even if they do not match the filter criteria. You can also click a column header to sort by that column.

5. Check Selected for the required charge standards.
6. Enter a file name and select a location. The file type is DCST. See File Formats.
7. Click Save.

   A status message displays.

8. Click OK.