View Contributor Data for a MineMarket Object

Security Note: Assuming you can view the object, no specific security right is required for this activity.

Activity Steps

  1. For a stockpile, open the WAG Stockpile, FIFO Stockpile, LIFO Stockpile, 3D Stockpile or Waste Stockpile.
  2. For a despatch, open the Train, Truck Despatch, Service Trip or Shipment.
  3. For a despatch order, open the Despatch Order.
  4. For a discrete unit batch of packages, open the Discrete Unit Batch.
  5. For a package, open the Package.
  6. Select the Contributors tab, or for a shipment, the Contributors sub-tab of the State tab.
  7. In the Criteria field group, update the Start Date and End Date for the data to display if required.
  8. Click Refresh (in the Criteria field group).
  9. Select the Contributor Group from the contributor groups defined on the Quality panel of the Solution Explorer.
  10. Enter a Contributor Cut Off if required. The limit below which contributors are not assigned. Any contributors with a value lower than the cut-off value are consolidated and grouped under 'Others'. The default Contributor Cut Off value can be any number between 0.1 and 99.99%, but is typically between 1% and 5%.
  11. To view slice data for a contributor, click the contributor's segment of the pie chart or the contributor in the Contributors table.

    In the Slice Data table, the Relevance is a calculated percentage that indicates the proportion of the mass for which analyte sample values are known.

    In the Contributors table, the Relevance is a calculated percentage that indicates the proportion of the mass for which contributor values are known.

  12. To modify the appearance of the pie chart:
    1. Right-click the chart and select Show Wizard from the menu.

      The Chart Wizard displays.

    2. Edit the chart properties as required.
    3. Click Accept.
  13. To save the pie chart as a BMP, GIF, JPEG, PNG or TIFF image, right-click the chart and select Save To File from the menu.