Assign Unassigned Stockpiles to Stockyard Rows

Use this activity to assign unassigned stockpiles to stock rows in a stockyard.

A stockpile is considered to be unassigned if it exists in the stockyard but does not have any metre mark entries. Unassigned stockpiles do not display in the time view or bird's eye view of the stockyard.

Security Note: You need the following security rights for this activity:

  • Allow stockyard maintenance in the Supply Chain user group security rights group
  • Allow stockpile maintenance in the Stockpiles domain security rights group

Activity Steps

  1. Open the Stockyard.
  2. Select the Unassigned Stockpiles tab.
  3. Double-click the stockpile that is to be assigned meterage in a stock row.

    The FIFO Stockpile, LIFO Stockpile or WAG Stockpile displays.

  4. Select the Metre Marks tab.
  5. Right-click and select New from the menu.
  6. Complete the following fields.
    • Stock Row
    • Start Metre—Defaults to the stock row Start Metre; however, this may be changed to reflect the fact that multiple stockpiles may exist in the stock row.
    • End Metre—The meterage selected cannot contain any dead zones.
    • Start Date—Date from which the stockpile can be found in the stock row within the defined start and end metre marks.
    • End Date—Date up to which the stockpile can be found in the stock row within the defined start and end metre marks.
  7. Click Save.