Edit the Details of a 3D Reclaiming Transaction via the 3D Transaction Viewer

Security Note: You need the Allow the user to open the 3D stockpile viewer security right in the 3D user group security rights group for this activity.

Activity Steps

  1. Open the 3D Transaction Viewer for the stockpile.
  2. Select the required transaction in the Transactions table.

    Note: If the required transaction does not display, Find Transactions in the 3D Transaction Viewer.

  3. Select the Details tab.
  4. Update the following fields as required.
    • Date—Date of the 3D transaction.
    • Quantity—Quantity of the 3D transaction, in metric tonnes.
    • Movement Product—Select from the products and brands defined on the Material panel of the Solution Explorer.
  5. Update the following fields as required.
    • Product—Select from the products and brands defined on the Material panel of the Solution Explorer. The angle of repose and the density of the product are used to validate the dimensions and volume of the 3D transaction.
    • Reclaimer—Select from the reclaimers specified for the 3D stockpile.
  6. If the Reclaimer is a boom reclaimer:
    1. Complete the following fields.
      • Reclaim Method—Select from By Position or By Volume.
      • Y Start Position—Start position of the 3D transaction along the y-axis.

        Note: When entering the Y Start Position for a boom reclaimer, consider the length of the boom. The Y Start Position is the location of the reclaimer. Example: A boom reclaimer has a boom length of 50 m. If the Y Start Position is 160 m and the Direction is Negative, stockpile reclamation starts at 110 m.

      • Direction—Select from Positive or Negative.
    2. To add a bench, right-click in the Benches table and select Add bench from the menu.
    3. For each bench, complete the following fields.
      • Height
      • Y Position
  7. If the Reclaimer is a bridge reclaimer, complete the following fields.
    • Y Start Position
    • Direction
  8. If the Reclaimer is a front-end loader:
    1. Complete the following fields as required.
      • Use Same Height—Whether to use the same height for all corners of the 3D transaction.
      • Height—Height for all corners of the 3D transaction. Only applicable if Use Same Height is checked.
      • Reclaim As Rectangle—Whether to reclaim a rectangular section of the 3D stockpile. If checked, only the First Corner and Opposing Corner details are required. If unchecked, details for all four corners are required.
      • Reclaim Full Width—Whether to claim the full width of the 3D stockpile. If checked, only the Length Position and Height at each corner are required. If unchecked, the Width Position at each corner is also required.
    2. Compete the following fields for each corner as required.
      • Width Position—Width position of the corner, in metres.
      • Length Position—Length position of the corner, in metres.
      • Height—Height of the corner, in metres.
  9. If the Reclaimer is a tunnel reclaimer, enter the Tonnes for each Gate in the Tunnel Gates table.

    Note: The number and order of the tunnel gates cannot be modified when entering a transaction. The tunnel gates must be specified in the reclaimer configuration for the stockpile.

  10. Update the Destination Stockpile. Name of the stockpile upon which material is stacked.
  11. Click Save.