View and Filter Comparison Calculations

Use this activity to view and filter the list of comparison calculation settings on the Comparison Calculations screen.

Activity Steps

1. Open the Comparison Calculations Screen.

   The Comparison Calculations screen displays the list of configured calculation settings.

2. Use the table controls to refine and review the calculation list as required:
   • Click a column heading to sort the table by that column.
   • Click the filter icon in a column heading to apply column-level filters.
   • Review the columns to identify the required row:
     • Measure Type – Displays the row type; for example, Measure, Grade, or Attribute.
     • Measure – Displays the measure, grade, or attribute name that the comparison calculation applies to.
     • Calculation Type – Displays the configured comparison calculation type.
     • Decimal Places – Displays the number of decimal places used in tables and chart labels.
     • 2nd Upper Control Limit – Displays the outer upper tolerance limit if configured.
     • 1st Upper Control Limit – Displays the inner upper tolerance limit if configured.
     • 1st Lower Control Limit – Displays the inner lower tolerance limit if configured.
     • 2nd Lower Control Limit – Displays the outer lower tolerance limit if configured.
     • Style Configuration – Displays the selected control limit style.
3. To filter the list by measure type:
   1. Click the filter icon in the Measure Type column.
   2. Select the required measure type; for example, Grade.
   3. Apply the filter.

      The table refreshes to display only rows for the selected measure type.

4. To modify a row, see Configure Comparison Calculations.