Process Help

TRUETHK - generate true thickness drillhole composites

 

Process Name

Menu Path

Link to Command Table

TRUETHK

Sample Analysis ribbon | Prepare Samples | True Thickness

Click here

 

Introduction

note.gif (1017 bytes)

This is a Superprocess and running it may have an effect on other Datamine files in the project. More...

 

For tabular ore bodies, based on a set of static drillhole sample data, composites are commonly created across the defined ore boundaries.

How to use

These composites can be defined by either lithological codes, or by selection and assignment of codes based on physically defined limits – perimeters and/or wireframes.  For subsequent analysis and reserve evaluation, a common requirement is the true width of each ‘ore’ composite.  Sometimes, the horizontal and/or vertical thicknesses are also required. The TRUETHK process, therefore, enables the calculation of true thickness values, based on the supplied sample lengths and orientations, and the supplied ore body dip and dip direction across which the samples have been taken.

The input file to the process is a standard DATAMINE desurveyed sample file, which must contain at least the fields LENGTH, A0 and B0. Compulsory input parameters are the ore body dip and dip direction. The output file created will essentially be a copy of the input sample file, but with the additional fields TRUETHK, VERTHK, HORTHK and TRUEDIP.


Files, Fields and Parameters

Input Files

Name

Description

I/O Status

Required

Type

IN

Sample/composite data file.

Input

Yes

Sample Data

Output Files

Name

I/O Status

Required

Type

Description

OUT

Output

Yes

Sample data

Sample/composite data with calculated true, vertical and horizontal thickness fields.

Parameters

Name

Description

Required

Default

Range

Values

DIP

Ore body dip value.

Yes

0

0,90

 

DIPDIRN

Ore body dip direction.

Yes

0

0,360

 


Notes

No additional notes.


Example

!TRUETHK  &IN(file1), &OUT(file2), @DIP=25, @DIPDIRN=300


Error and Warning Messages

Message

Description

Solution