cone-from-drillhole ("cnfd")

See this command in the command table.

To access this command:

  • Sample Analysis ribbon >> Edit Drillholes >> Cones >> Cones from Drillholes.

  • Using the command line, enter "cone-from-drillhole"

  • Use the quick key combination "cnfd".

  • Display the Find Command screen, locate cone-from-drillhole and click Run.

Command Overview

Generate a wireframe cone from a drillhole.

Command steps:

  1. In the Current Objects toolbar, create a new wireframe object. See Current Objects Toolbar.

  2. Run the command.

  3. In any 3D window, select a drillhole.

  4. Using the Generate Cones screen, define the following parameters:

    • Deviation Field — an optional field in the drillhole object that denotes the deviation from plan (potentially per sample).

    • Start Radius — the deviation from plan at the start of the hole. This can be regarded as the upper cone radius.

    • Minimum Segment Length. — the minimum possible length of a cone segment from its neighbour. The average sample length is a reasonable guide for this.

    • Name Field — if specified, this value is added to all wireframe cone segments.

  5. Click OK.

    A wireframe cone is created based on the above parameters, starting at the drillhole collar and deviating outwards towards the end-of-hole.

    The command completes automatically.

Related topics and activities