|
|
Process Help PLOTSK - create an annotated drillhole section plot specific to Kidd Creek |
|
Process Name |
Menu Path |
Link to Command Table |
|
PLOTSK |
Command line only |
Introduction
Kidd Creek annotated section plot through drillholes.
Files, Fields and Parameters
Input Files
|
Name |
Description |
I/O Status |
Required |
Type |
|
IN |
Input drillhole file, in standard sample format. If there is a field in this file, then the given colour number will be applied to each sample trace or barplot. |
Input |
Yes |
Drillhole |
|
PROTO |
Plot prototype file. Must contain the fields X, Y, S1, S2 and CODE (numeric, explicit) and XMIN, XMAX, YMIN, YMAX, XSCALE, YSCALE (numeric, implicit). If these last 6 values set in PROTO , then corresponding parameters need not be set. |
Input |
Yes |
Plot Prototype |
Output Files
|
Name |
I/O Status |
Required |
Type |
Description |
|
PLOT |
Output |
Yes |
Plot |
Output plot file. |
Fields
|
Name |
Description |
Source |
Required |
Type |
Default |
|
X |
Sample centre X co-ordinate. |
IN |
Yes |
Numeric |
X |
|
Y |
Sample centre Y co-ordinate. |
IN |
Yes |
Numeric |
Y |
|
Z |
Sample centre Z co-ordinate (elevation). |
IN |
Yes |
Numeric |
Z |
|
LENGTH |
Sample length. |
IN |
Yes |
Numeric |
LENGTH |
|
A0 |
Sample bearing. |
IN |
Yes |
Numeric |
A0 |
|
B0 |
Sample dip. |
IN |
Yes |
Numeric |
B0 |
|
BHID |
Drillhole identifier. |
IN |
Yes |
Numeric |
BHID |
|
FROM |
Downhole distance to sample top. |
IN |
Yes |
Numeric |
FROM |
|
TO |
Downhole distance to sample bottom. |
IN |
Yes |
Numeric |
TO |
Parameters
|
Name |
Description |
Required |
Default |
Range |
Values |
||||
|
X1 |
X co-ordinate of section line start. |
Yes |
Undefined |
Undefined |
Undefined |
||||
|
Y1 |
Y co-ordinate of section line start. |
Yes |
Undefined |
Undefined |
Undefined |
||||
|
X2 |
X co-ordinate of section line end. |
Yes |
Undefined |
Undefined |
Undefined |
||||
|
Y2 |
Y co-ordinate of section line end. |
Yes |
Undefined |
Undefined |
Undefined |
||||
|
DISTANCE |
Maximum projection distance to section. drillhole intervals are clipped at the boundaries of the spatial window defined by the section line (X1,Y1) to (X2,Y2), the vertical coordinates from YMIN to YMAX and the thickness DISTANCE on both sides of the section line. |
Yes |
X1,Y1 |
Undefined |
Undefined |
||||
|
NDP |
Number of decimal places for grade values. |
Yes |
Undefined |
Undefined |
Undefined |
||||
|
ANGLE |
Angle for drillhole id, 0=horizontal, -90=vertically upwards, -= at angle of first sample (-). |
No |
- |
Undefined |
Undefined |
||||
|
DHD |
Plot downhole distances at given interval (0). |
No |
0 |
Undefined |
Undefined |
||||
|
XOFFSET |
Annotation offset in mm. to the right of sample centre at rt. angles to sample (0). |
No |
0 |
Undefined |
Undefined |
||||
|
YOFFSET |
Annotation offset in mm. up from sample centre along sample (0). |
No |
0 |
Undefined |
Undefined |
||||
|
LINECODE |
Line Type to be used to join each point. Default (1). Line Types: 1 : Solid line 2 : Bold line 3 : Dashed line 4 : Dotted line 5 : Dot-Dash line |
No |
1 |
1,5 |
1,2,3,4,5 |
||||
|
NOTICK |
|
No |
0 |
0,1 |
0,1 |
||||
|
NOANNOT |
|
No |
0 |
0,1 |
0,1 |
||||
|
ANBOTHOL |
|
No |
0 |
0,1 |
0,1 |
||||
|
DTRWIDTH |
Double trace width in mm. when the trace is in the section, 0 = single trace. (0). |
No |
0 |
Undefined |
Undefined |
||||
|
PPSYMBOL |
Symbol at section plane Pierce Point (92). |
No |
92 |
Undefined |
Undefined |
||||
|
PPSYMSIZ |
Pierce Point symbol size in mm. 0= no symbol (0). |
No |
0 |
Undefined |
Undefined |
||||
|
ENEXDHD |
Annotate down the hole distance and distance from the section line at entry and exit. section entry and exit. (0) (0) = No annotation. 1 = Annotation. Distance from the secton line is positive on the side away from the viewer. -1 = Annotation. Distance from the section line is negative on the side away from the viewer. |
No |
0 |
-1,1 |
-1, 0, 1 |
||||
|
LINCOLFQ |
Trace colour in section far quarter. (14) |
No |
14 |
Undefined |
Undefined |
||||
|
LINCOLCH |
Trace colour in section centre half. (14) |
No |
14 |
Undefined |
Undefined |
||||
|
LINCOLCQ |
Trace colour in section close quarter. (14) |
No |
14 |
Undefined |
Undefined |
||||
|
DTRTYPFQ |
Double trace line type when the trace is in the far quarter of the section. 1= Solid line. 2= Broad solid line. 3= Long dash 3 mm. dash, 3 mm. intervals. 4= Dots, 1 dot per mm. (4) |
No |
4 |
1,4 |
1,2,3,4 |
||||
|
DTRTYPCH |
Double trace line type when the trace is in the central half of the section. 1= Solid line. 2= Broad solid line. 3= Long dash 3 mm. dash, 3 mm. intervals. 4= Dots, 1 dot per mm. (1) |
No |
1 |
1,4 |
1,2,3,4 |
||||
|
DTRTYPCQ |
Double trace line type when the trace is in the closest quarter of the section. 1= Solid line. 2= Broad solid line. 3= Long dash 3 mm. dash, 3 mm. intervals. 4= Dots, 1 dot per mm. (3) |
No |
3 |
1,4 |
1,2,3,4 |
||||
|
ANTICKM |
Tick marks to delineate annotations. These are single sided ticks, with a length equal to XOFFSET. 1= ticks, 0= no ticks. (1) |
No |
1 |
0,1 |
0,1 |
||||
|
VERBOSE |
0= Annotate only when the value changes. 1= Annotate all intervals even if the value of contiguous intervals is similar. (0) |
No |
0 |
0,1 |
0,1 |
||||
|
CHARSIZE |
Character size in millimetres (4). |
No |
4 |
Undefined |
Undefined |
||||
|
ASPRATIO |
Aspect ratio, width / ht. for chars (0.9). |
No |
0.9 |
Undefined |
Undefined |
||||
|
|
Colour [as 'pen' number] for plot (14). |
No |
14 |
Undefined |
Undefined |
||||
|
APPEND |
Plot append flag. If set to 1 then the new plot will be appended to the PLOT file, if it exists and is a valid plot file (0). |
No |
0 |
0,1 |
0,1 |
||||
|
XMIN |
Minimum value of X for plot [Suggest 0]. None of XMIN, XMAX, YMIN, YMAX, XSCALE, YSCALE need be set if this information is already in the prototype. |
No |
Undefined |
Undefined |
Undefined |
||||
|
XMAX |
Maximum value of X for plot [Suggest section length as defined by X1 , Y1 , X2 , Y2]. |
No |
Undefined |
Undefined |
Undefined |
||||
|
YMIN |
Minimum value of Y for plot [Lowest Z value]. |
No |
Undefined |
Undefined |
Undefined |
||||
|
YMAX |
Maximum value of Y for plot [Highest Z value]. |
No |
Undefined |
Undefined |
Undefined |
||||
|
XSCALE |
X scale in user data units per millimetre. |
No |
Undefined |
Undefined |
Undefined |
||||
|
YSCALE |
Y scale in user data units per millimetre. |
No |
Undefined |
Undefined |
Undefined |
Notes
No additional notes.
Example
Error and Warning Messages
|
Message |
Description |
Solution |
|
|
|
|
|
|
|
|
