Command Help

plane-by-one-point

 

Command Name

Menu

Quick Key

Link to Command Table

plane-by-one-point

View ribbon | Sections | 1 Point

With a 3D window in focus, Press "1"

1

Click here

Description

Set view direction/position (Design window) or plane location/orientation (3D window) based on a selected point and orientation.

The way this command behaves between the Design and 3D windows is important; the Design window does not support a non-orthogonal plane for digitizing/editing, whereas in 3D you can digitize to any previously defined section. As such, in the 3D window, this command will create a new section plane and will not affect the view direction - setting the view direction in 3D is possible using the view-by-one-point command.

How to use

  1. Run the command.

  2. Following the prompt, select (snapping is allowed) a point in the window.

  3. In the Plane By One Point dialog, select a view (or plane) orientation, or choose to create a section that is orthogonal to the current view direction (Align to View). More about align-section.

  4. Click OK.