Command Help

offset-inside-string

 

Command Name

Menu

Quick Key

Link to Command Table

offset-inside-string

Design ribbon | Roads | Expand | Shrink

Surfaces ribbon | Design | Tools | Shrink

ois

Click here

Description

Creates a new string/perimeter inside the selected string/perimeter, in the plane of the current view plane, by shrinking the selected string/perimeter by the specified distance.

 Preselecting data obviates the need to click on multiple items when running this command.

 

How to Use

  1. Select the required string(s) or perimeter(s).

  2. Run the command.

  3. In the resulting dialog, specify the expansion distance, and click OK

note.gif (1017 bytes)      
  • The specified offset will be applied perpendicular to each segment of the string.
  • If a rosettes file is currently loaded and use-rosettes-switch is toggled ON,  the expansion distance will be derived from the berm width value(s) in the ROSBWID field of the rosette file.
  • If a suitable block model is loaded and the use-modelfile-switch is toggled ON, the expansion distance will be derived from the berm width value(s) in the BERMWDTH field of the block model file.
  openbook.gif (910 bytes)   Related Topics

 

offset-string
offset-outside-string

project-string-at-angle

use-modelfile-switch

use-rosettes-switch