Configure the Filter Tab

The 3D Filter tab defines some options associated with filtering the data shown in the 3D window.

Activity Steps

1. Select the Data Component with associated 3D data from the Project Tree.
2. Select the 3D Viewer tab at the top of the Main Canvas.
3. Select the Filter tab in the Property Panel.
4. Configure the following options as required.
   • NumShown – Number of data points displayed in the 3D Viewer.
   • NumTotal – Total number of data points.
   • Show Filter and Data Window – Display the Filter and Data Window to set complex filters.
   • Display Options field group:
     • Show unfiltered – Show all data, with the data that did not pass the filter shown in a separate colour and size. Only available if a filter has been applied. See Filtering 3D Data for more information.
     • Filtered Out Colour – Colour of unfiltered data in the 3D window. Only available if Show unfiltered is checked.
     • Unfiltered Size – Size of unfiltered data in the 3D window. Only available if Show unfiltered is checked.
     • Monochrome colour – Display filtered data in one colour. Only available if a filter has been applied.
     • Filtered In Colour
     • Monochrome Size
   • Filter Options field group:
     • Use filter
     • Auto filter – Whether to allow filtering in the 3D window or restrict filtering to only be applied through the Filter Toolbar or Filter and Data Window.
     • Reverse filter – Reverse colouring of filtered and unfiltered data.
     • Filtered count – The number of data objects that passed the filter.
   • Equation – Filter equation entered in the Filter and Data window.