Drill and Blast Tab
The following tables describe the tools on the Drill and Blast tab.
Create Group
| Tool | Description | Command | |
|---|---|---|---|
|
Set Working Drift | Set a drift outline as a Working Drift. | ABLS_DRIFTSET |
|
Set Blast Outline | Set one or more outlines as a Blast Outline. | ABLS_BLASTOUTLINESET |
|
Place Drill | Place a drill in a working drift. | ABLS_SCREATE |
|
Name Setup | Name a drill setup. | ABLS_SANNOTATE |
|
Move Setup | Move a drill setup. | ABLS_SMOVE |
|
Erase Setup | Delete a drill setup. | ABLS_SERASE |
|
Set Remote Boundary | Place a boundary where the drill setup cannot surpass. | ABLS_REMOTEDRILLINGBOUNDARYSET |
|
Unfold Setup | Unfold a setup in plan view for plotting purposes. | ABLS_UNFOLDSETUP |
|
SmartSet | Recognize the working drift and blast outline in the selected section, then Amine recognizes the same drift and blast outlines in all the other sections and set them to the same. | ABLS_DRIFTSET_N |
Design Group
| Tool | Description | Command | |
|---|---|---|---|
|
Hole Layout | Layout a single hole from a drill location in a working drift, to a blast layout. | ABLS_HLAY1 |
|
Fan Pattern | Layout a drill holes in a fan pattern from a drill location in a working drift, to a blast layout. | ABLS_HLAYFAN |
|
Parallel Pattern | Layout parallel drill holes from a drill location in a working drift, to a blast layout. | ABLS_HLAYPARALLEL |
|
Multiple Setups | Layout drill holes from multiples setups on the same section, to a blast layout. | ABLS_HLAYMULTIPLE |
|
Erase Holes | Erase drill holes. | ABLS_HOLERASE |
|
Create Slot | Create a slot pattern on a plan view and extrude the pattern to a blast layout. | |
|
Move Holes | Move drill holes on the working plane. | ABLS_HOMOVE |
|
Move in 3D | Move drill holes away from the working plane in a 3D fashion. | ABLS_HOMOVE3D |
|
Modify Dump | Modify the dump in numerical values of the drill hole in question. | ABLS_HODUMP |
|
Trim Holes | Trim drill holes to a selected outline. | ABLS_HOTRIM |
|
Names Holes | Name drill holes. | ABLS_HNAMEADD |
|
Erase Name | Erase the names of the drill holes. | ABLS_HNAMEERASE |
|
Annotate Holes | Add the length and angle of the drill hole automatically. | ABLS_HANNOADD |
|
Annotate Breakthrough | Add breakthrough annotations at the end of your drill holes. | ABLS_HMADDBT |
|
Annotate Backfill | Add backfill annotations at the end of your drill holes. | ABLS_HMADDBF |
|
Erase Annotations | Erase the annotations created. | ABLS_ANNOERASE |
|
Collar Hole | Add collar annotations at the beginning of your drill holes. | ABLS_HMADDCOLAR |
|
Add Toe | Add toe annotations at the end of your drill holes. | ABLS_HMADDTOE |
|
Erase Collar/Toe | Erase the collar or toe annotations created. | ABLS_HMERASE |
|
Ref Collar to Drill | Extend a reference line from the collar of the drill hole to the pivot point of the drill. | ABLS_HEXTENDCOLLAR |
|
Erase Ref to Drill | Erase the reference line created from the collar of the drill hole to the pivot point of the drill. | ABLS_HEXTENDCOLLARERASE |
|
Unfold Collars | Unfold the collars of the holes in a plan view. | ABLS_UNFOLDCOLLAR |
|
Unfold Toes | Unfold the toes of the holes in a plan view. | ABLS_UNFOLDTOE |
|
Cone Holes | Create a user-defined cone from Collar to Toe showing possible drill deviations. | ABLS_VAUTOCONE |
|
Model Holes | Create a modeled cynlinder around the drill holes with a user-defined diameter. | ABLS_VMHOLE |
|
Bag | Create a warning at the bottom of the hole to insert a bag. | ABLS_VBAG |
|
Stem | Create a warning at the top of the hole to insert a plug. | ABLS_VSTEM |
|
|
Remote Drilling | Create a remote drilling warning at a user-defined distance in the hole. | ABLS_VREMDRILL |
|
Energy Outline | Create an outline of the estimated blast energy being created. | IBS_ENERGY_OUTLINE |
|
Hole Outline | Create an outline of the drill holes on the present ring. | IBS_HOLE_OUTLINE |
|
Powder Outline | Create an outline of the powder on the present ring. | IBS_POWDER_OUTLINE |
Load Group
| Tool | Description | Command | |
|---|---|---|---|
|
Load Holes | Load the holes with powder and blasting cap. | ABLS_PGUI |
|
Move Powder | Move the powder inside the hole. | ABLS_PMOVE |
|
Move Powder - Multiple | Move the powder inside multiple holes. | ABLS_PMMOVE |
|
Erase Powder | Erase the powder from a hole. | ABLS_PERASE |
Plot Group
| Tool | Description | Command | |
|---|---|---|---|
|
Create Blast Letter | Create a blast letter using a defined template. | ABLS_LBLAST |
|
Plan View (Blast Letter) | Create a plan view of the blast holes, typically an additional viewport on the blast letter. | ABLS_LBLASTPLAN |
|
Refresh Blast Letter | Refresh an existing blast letter with updated information. | ABLS_LREFRESH |
|
Create Drill Letter | Create a drill letter using a defined template. | ABLS_LDRILL |
|
Plan View (Drill Letter) | Create a plan view of the drill holes, typically an additional viewport on the drill letter. | ABLS_LDRILLPLAN |
|
|
Refresh Drill Letter | Refresh an existing drill letter with updated information. | ABLS_LREFRESH |
|
Add North Arrow | Add a north arrow do your layout. | ABLS_NORTHARROW |
|
Add View Arrow | Add a view arrow to your layout. | ABLS_LOOKARROW |
|
Add Elevation Line | Add an elevation marker to your drawing. | ABLS_ELEVATIONLINE |
|
Add Ref Line | Add a reference line to your drawing. | ABLS_REFERENCELINE |
|
Combine All Views | Combine all the section views into one layout much like a light-table view. | ABLS_LIGHTTBLE |
|
Print Rings | Print the sections created. | ABLS_PLOTRINGS |
|
Reset View Port Scale | Reset the viewport scale. | ABLS_RESETSCALE |
General Tools Group
| Tool | Description | Command | |
|---|---|---|---|
|
Drill Blast Info | Extract general information on the Drill and Blast project. | ABLS_LEXPORT |
|
Summary Info | Extract general information on the stope and workplace. | ABLS_SUMMARYINFO1 |
|
Hole Info | Extract detailed information on the holes plotted. | ABLS_HINFO |
|
Drill Info | Extract detailed information on the drill per section. | ABLS_EXTRACTRINGSETUP |
|
Settings | Settings related to the drill and blast project. Drill, powder, blasting caps amongst more information can be found in these settings. | ABLS_CONFIG |
|
Database Connection | Drill and Blast information connection link between SQL and Amine. | ABLS_DBSETUP_IBLAST |
|
Databse Connection (Info) | Drill and Blast information connection link between SQL and Amine. | ABLS_DBSETUP_IBLASTINFO |
|
SQL Convert | SDF file conversion to an SQL database file. This is only needed to be done one time, if not created before. Check with your administrator before create a new SQL database file. | ABLS_DBCONVERT |
