Haulage Destinations

To access this screen:

  • Optimization control bar >> Scheduler >> Haulage Info and select the Haulage Destinations tab.

Set the destination of the hauled material whether the destination is a plant, stockpile or waste dump. Parameters for each destination define the haul cycle time from the pit(s) and to the stockpiles.

  • Processing destinations (Plants) are defined in the Economic Settings

  • Define stockpiles using the Scheduling Setup: Stockpiles screen.

  • Waste dumps are defined on this screen.

Activity steps:

  1. Display the Haulage Destinations screen.

  2. Select a destination from the table at the top of the screen.

  3. Choose Travel Parameters.

    1. Click the upper Edit button to define the travel parameters from the pit to the entry point and within the destination. Displays the Define Destination Parameters screen.

    2. Click the lower Edit button to define the travel parameters from stockpiles to the entry point of the destination. Displays the Surface distances from stockpiles to destination screen.

  4. If required, Add or delete a dump. You can either:

    • Add dump for ore types, or;

    • Add dump for waste types.

      Enter a name in To add, type a name. This must be unique for the case study, then click Add.

      Note: You can also Delete an existing dump name from the destination list.

  5. Select a Mine Source to display the associated Stockpiles in the adjacent list. A mine source is a material (say, Oxide or Sulfide).

  6. Click Check complete to highlight any undefined destinations.

  7. Click OK and save your project.

Related topics and activities: