Command and Processes Table - G

For more information on the terms 'Command', 'Process' and 'Macro Command', see Command Table Introduction.

These tables list all commands and processes available in all products. If your product has access to a command or process, the link on the left of the table takes you to a dedicated help file for more information. If no link appears, the function isn't available in your product.

Symbols used in this table:

A green tick indicates that the module is part of the core system licensing for the specified product - no additional module is required.

X A red cross indicates the module is not part of the listed system and any commands held within it cannot be run (a separate product will be required).

A blue diamond indicates the module is an optional extra for the specified system.

For Macro commands, see here.

Commands - G

Command Name

Description

More Help

gaussian-wireframe-from-points

X

X

Generates a DTM or solid wireframe from a point cloud data file in memory.

Command Help

generate-contours-from-points

X

X

Generate a series of contours and an output grid model from input sample points.

Command Help

generate-contours-from-holes-intercepts

X

X

Generate contours from drillhole intercepts. Wireframes can also be generated

generate-distance-contours

X

X

Generate contours of the distance from the sample points.

Command Help

generate-grids-in-outlines

Generate a regular grid of strings within selected outline string data.

Command Help

generate-outlines

Generate outlines (perimeters) from areas defined by multiple crossing strings.

Command Help

generate-outlines-attrib

Similar to the generate-outlines command (used to replace crossing strings with perimeters outlining adjacent areas), but uses the first string used in the outlining process to derive attributes for the remaining strings.

Command Help

get-all-strings

Load all (filtered) strings from a named string file.

Command Help

get-drillholes

Load all (filtered) strings from a named string file.

Command Help

get-points

Get points into memory from a named points file.

Command Help

get-view

Retrieves a specified set of view parameters from a loaded section definition table; prompting for a definition definition file if one has not yet been loaded. (Design window only)

Command Help

get-wf_data

Get data from supplied wireframe triangle and point files.

Command Help

gradient-degrees-switch

Sets the gradient convention unit to degrees.

Command Help

gradient-percent-switch

Sets the gradient convention unit to %.

Command Help

gradient-positive-up-switch

Toggle the gradient positive value convention.

Command Help

gradient-ratio-switch

Sets the gradient convention unit to ratio.

Command Help

grid-dtms

X

Create a grid of points to represent the average, minimum or maximum elevations of points belonging to multiple (and potentially overlapping) wireframe surfaces.

Command Help

group-lithology

X

X

X

X

X

define groups containing one or more lithology values.

grid-interval-on-string

Make new string vertices, based on XYZ grid intersections.

Command Help

group-selection-display

Set parameters for the display of the selected data set.

Command Help

gvp-cells-update-switch

Toggle on or off whether block model cells will be updated in the 3D window when transferring data from the Design window. .

Command Help

gvp-dhole-update-switch

Toggle on or off whether drillholes will be updated in the 3D window when transferring data from the Design window using update-vr-objects.

Command Help

gvp-gouraud-switch

Toggle on or off smooth (Gouraud) shading in the 3D window when transferring data from the Design window using update-vr-objects..

Command Help

gvp-hole-collar-bhid-switch

Toggle on or off the display of BHID labels at the collar position when transferring data from the Design window to the 3D window via update-vr-objects.

Command Help

gvp-hole-end-bhid-switch

Toggle on or off the display of BHID labels at the end of the hole when transferring data from the Design window to the 3D window via update-vr-objects.

Command Help

gvp-modelp-update-switch

Toggle on or off whether model planes will be updated in the 3D window when transferring data from the Design window using update-vr-objects.

Command Help

gvp-modelpc-update-switch

Toggle on or off whether the model cloud will be updated in the 3D window when transferring data from the Design window using update-vr-objects.

Command Help

gvp-modelwf-update-switch

Toggle on or off whether the model with wf will be updated in the 3D window when transferring data from the Design window using update-vr-objects.

Command Help

gvp-point-annot-update-switch

Toggles point annotation in the 3D window when transferring data from the design window using update-vr-objects..

Command Help

gvp-point-update-switch

Toggle on or off the updating of point data in the 3D window when transferring data from the design window using update-vr-objects.

Command Help

gvp-string-update-switch

Toggle on or off whether string data will be updated in the 3D window when transferring data from the design window using update-vr-objects.

Command Help

gvp-unload-planes-switch

Control whether previously loaded planes are removed when transferring data from the Design window to the 3D window via update-vr-objects.

Command Help

gvp-wf-update-switch

Toggle on or off whether wireframe data will be updated in the 3D window when transferring data from the Design window to the 3D window via update-vr-objects. .

Command Help

 

Processes - G

Process Name

Description

More Help

GAUSAN

X

X

X

X

X

X

X

Perform a gaussian anamorphose transformation on a set of sample data.

GAUSANAM

X

X

X

X

X

X

X

Transforms a variable Y with a gauss­ian distribution in a new variable Z, with any distribution.

GENTRA

General field transformation. Fields are transformed using one or more standard GENTRA transformation functions, field (data column) names and constants.

Process Help
GETSAMP X

X

X X X X GETSAMP produces a sample file from a desurveyed drillhole file. Process Help

GRADE

X

X

X

X

The process provides a choice of methods to interpolate a grade into a block model. 

GRIDDC

X

X

The GRIDDC process calculates the declustered weight for a set of samples using a gridding method.

Process Help

GRTON

X

X

X

X

X

X

X

Calculate grades and tonnages using results from a Gaussian anamorphosis. 

 

For Macro commands, see here.